AKZ STUDIOS
P.O.BOX 2161
WEIRTON,WV 26062      (304) 748-1196

VIEWING THE 4 BAND INSTRUCTIONS BEFORE ATTEMPTING TO ASSEMBLE THE 6 BAND RING MAY ALSO BE HELPFUL.
THE ONLY DIFFERENCE BETWEEN THE 4 BAND
AND THE SIX BAND ASSEMBLY IS THAT YOU NOW HAVE 2 MATCHING SETS TO HOLD TOGETHER INSTEAD OF THE 2 SINGLE BANDS.  THE SET OF BANDS WITH THE SHARPEST CURVE SHOULD POINT AWAY FROM YOU. YOU ARE HOLDING THESE 4 BANDS OUT OF THE WAY WHILE YOU PUT THE 2 HANGING BOTTOM BANDS TOGETHER.
THE 2 HANGING BOTTOM BANDS MUST BE IN THE CORRECT POSITIONS. THE BAND ON THE
RIGHT WILL BE STAMPED " AKZ " ON THE INSIDE. THE BAND ON THE LEFT WILL HAVE AN INDENTATION IN THE CENTER OF IT. THIS IS WHERE THE RIGHTHAND BAND WILL CROSS OVER IT.
THE 2 BOTTOM BANDS CAN NOW BE PUT TOGETHER. WITH BOTH BANDS FACING UPWARD TURN THE LEFT BAND COUNTER CLOCKWISE UNDER THE RIGHTHAND BAND
INTERLOCKING THEM INTO A PERFECT FIT.
THESE 2 BANDS ARE NOW IN PLACE.
YOU CAN NOW SLIDE THE 2 REMAINING SETS OF BANDS INTO PLACE, BUT ONLY ONE SET AT A TIME. THE SET OF BANDS WITH THE SLIGHTY SHARPER CURVE WILL USUALLY BE
FIRST. THE LAST SET OF BANDS CAN NOW BE
TURNED AROUND TO THE CENTER  OF THE RING AND SHOULD FALL INTO PLACE.
                                             
.  6 BAND INSTRUCTIONS
4 BAND INSTRUCTIONS
8 BAND INSTRUCTIONS